Hitachi Infrared B/W Camera Module BE-IR20 Bedienungsanleitung

Please read this operation Guide carefully for proper operation, and keep it for future refernce.BE-IR20 / 21Infrared B/W Camera ModuleOperation Guide

9. Typical connectionBE-IR20 / 219BE-IR21Image processor orVideo monitorRegulated power supply(More then 300 mA)Note1 : • When more than one video m

10. External sync (BE-IR21)BE-IR20 / 2110Supply sync signals (HD and VD) for BE-IR21 operation. Refer to connection on page 9.z Horizontal and v

11. Function setting and changesBE-IR20 / 2111When changing the function settings , perform the work with thorough care. Be sure to useanti-stati

11. Function setting and changesBE-IR20 / 211211-2 Gamma responseThe factory setting is gamma on. If necessary , the gamma response can be change

11. Function setting and changesBE-IR20 / 211311-3 Auto electronic shutter on / offFactory setting for auto electronic shutter is off. If nec

11. Function setting and changesBE-IR20 / 211411-4 Changes to fixed shutter modeThe fixed shutter mode can be changed by replacing the chip part

11. Function setting and changesBE-IR20 / 211511-5 BE-IR20 external syncThe BE-IR20 factory setting is for internal sync. If required, this can

11. Function setting and changesBE-IR20 / 211611-6 BE-IR21 internal syncThe BE-IR21 factory setting is for external sync. If required, this can

11. Function setting and changesBE-IR20 / 211711-7 HD and VD output (BE-IR20 only)The BE-IR20 can be provided with horizontal and vertical drive

12. OptionsBE-IR20 / 2118LA-IR20 Mount adapter dimensionsRemove c-mount attachment to use as cs-mount.

Table of ContentsBE-IR20 / 2111. Introduction ･･･････････････････････････････････････････   22. General･････････････････････････････････････････････

12. OptionsBE-IR20 / 2119BE-IR20/21 and LA-IR20 combined dimensions

BE-IR20 / 2120Spectral sensitivity (typical example)10.90.80.70.60.50.40.30.20.10 400 500 600 700 800 900 1000

BE-IR20 / 2121CautionThe specifications of this equipment are subject to change without notice for improvement.Prior to placing your order , be sure t

1. IntroductionBE-IR20 / 212Thank you very much for your purchase of the Hitachi BE-IR20/21 Black and White CameraModule.Prior to using this camera

4．．．．SpecificationsBE-IR20 / 213 8) External sync input HD & VD : 5V peak-to-peak negative Input impedance : 1kΩ Frequency deviation : ±

5. Notes to usersBE-IR20 / 214 Power supplyz Connect a 9V DC voltage (8.5 to 9.5V) from an external regulated DC power supply.z Use a stable power

5. Notes to usersBE-IR20 / 215  Phenomena inherent to CCD imaging device Following are phenomena inherent to a CCD imaging device , and not defects.

6. External viewBE-IR20 / 216Dimensions 7. Optical dimensionsLens19.2 ± 0.5(C-mount)1.4 ± 0.2CCDBase plateImaging faceLens-mountExtension of optica

8. InstallationBE-IR20 / 217 When installing the camera in a housing or unit of equipment, secure with two M2 screwsinserted into the 2.5 mm diamete

9. Typical connectionBE-IR20 / 218BE-IR20Image processor orVideo monitorRegulated power supply(More then 300 mA)Note1 : • When more than one video