Hitachi CP-WUX645N Datenblatt PDF herunterladen (Seite 126)

3. Management with Web browser software

3.5 MY IMAGE (Still Image Transfer) Display (continued)

Congure the following items from a web browser when MY IMAGE is used.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter "http://192.168.1.10/" into the address bar of the web browser.

2) Enter the Administrator ID and password and

click [Logon].

3) Click [Port Settings] on the main menu.

4) Click the [Enable] check box to open the Image

Transfer Port (Port: 9716). Click the [Enable]

check box for the [Authentication] setting when

authentication is required, otherwise clear the

check box.

5) Click the [Apply] button to save the settings.

When the authentication setting is enabled, the following settings are required.

6) Click [Security Settings] on the main menu.

7) Select [Network Control] and enter the desired authentication password.

8) Click the [Apply] button to save the settings.

• The Authentication Password will be the same for Network Control

Port1 (Port: 23), Network Control Port2 (Port: 9715), and Image Transfer

Port (Port: 9716).

NOTE

• The new conguration settings are activated after restarting the network

connection. When the conguration settings are changed, you must restart

the network connection. You can restart the network connection by clicking

[Network Restart] on the main menu.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 175 176

Keine Kommentare

Hitachi CP-WUX645N Datenblatt Seite 126