ENGLISH1HAS-K250Wall mount unit for LCD projectorsModel nameHAS-K250 User’s ManualThe following symbols are used in this manual to help you use this p
10HAS-K250Template sheet usageDetermining location of wall holesPlace the template sheet (J) where you want to project the image. Vertical orientatio
ENGLISH11HAS-K250Adjusting arm lengthArrows at the right and left sides of the template sheet (J) indicate the distance from the screen surface to the
12HAS-K250(L) × 3(N) × 1 Attach the bracket (B) to the LCD projector using four M4 × 8 (G) hexagon head screws. Tightening torque: 0.98 N•m (10 k
ENGLISH13HAS-K250 Attach the LCD projector to which the bracket (B) has been attached to the adjusting block (Q). Tighten the four M4 x 8 round he
14HAS-K250Adjustments Turn the projector on and project an image to make adjustments. -1. Project an image, adjust the image settings and focus on t
ENGLISH15HAS-K250 Adjust the image.-1. Loosen the securing screws. (at the eight locations indicated by the arrows in the figure below)1. Loosen
16HAS-K2501. Fine adjustment of horizontal position2. Fine adjustment of horizontal keystone3. Fine adjustment of vertical keystone4. Fine adjustment
ENGLISH17HAS-K2507. Fine adjustment of vertical position1. Loosen the screw on on the lower right side. 2. Turn the height adjusting screw to adjust
18HAS-K250 -1. The knobs indicated by the arrows can be removed. Place them on the projections inside the front cap (C) for storage. WARNING Adju
ENGLISH19HAS-K250-2. Attach the front cap (C) at the front end of the arm (M). Engage the left, right and center claws. The adjusting knob
2HAS-K250Installation of this product requires special technical skills. Ask your dealer or service center (for details, see the User’s Manual supplie
20HAS-K250-5. Attach the arm cover (E) to the arm (M). Insert the eight claws in the arm cover (E) in the eight holes in the arm (M).-6. Ass
ENGLISH21HAS-K250(both 4:3 and 16:10 screens)• Roll down screens and other screens that are not perfectly flat tend to substantially distort the proje
22HAS-K250Item Image movementFine adjustment amount (amount of LCD projector movement)Description of adjustment methodFine adjustment of horizontal p
ENGLISH3HAS-K250WARNINGTo the customer Do not attempt to install the projector yourself. Have your dealer or service center handle all installation
4HAS-K250Symbol Part name Quantity Appearance Symbol Part name Quantity AppearanceAArm assembly1GM4 × 8 hexagon head screws4BBracket 1 HM4 × 8 round h
ENGLISH5HAS-K250 Remove the shipping screws from the arm assembly (A). The arm assembly (A) is assembled before shipping. Before attaching the arm
6HAS-K250 Remove the base bracket (O) from the arm assembly (A). Before attaching the arm assembly to a wall, remove the screws to disassemble it a
ENGLISH7HAS-K250 Attach the base bracket (O) to a wall using the anchor bolts (M10). The holes in the base bracket (O) are oval to permit horizont
Screen centerScreen centerScreen thicknessWall hole centerAmount of vertical adjustment42,5195(1,67)125 (4,92)136 (5,35)32 (1,26)c3ac285 (3,35)240c1c
ENGLISH9HAS-K250Screen sizes when used with Hitachi Star BoardProjection sizeAspect ratioDiagonal size (inches)DimensionsProjection sizeAspect ratioDi
Kommentare zu diesen Handbüchern