Hitachi BZ-1 Bedienungsanleitung

1ProjectorBZ-1User's Manual (detailed) Operating GuideThank you for purchasing this projector.►Before using this product, please read all manual

10LRRLCOMPUTER IN1COMPUTER IN2HDMIUSB TYPE BS-VIDEOVIDEOAUDIO OUTAUDIO IN3AUDIO IN1AUDIO IN2MICMONITOR OUTCONTROL USBTYPE A DC5V 0.5A L

100Presentation toolsUSB Display (continued)About The version information of the “LiveViewer Lite for USB”.Display LiveViewer Lite for USBIf you want

101Maintenance MaintenanceA lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poo

102MaintenanceLamp warningReplacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE►The projector uses a high-pressure mercury glass

103MaintenanceThe air lter unit of this projector consists of a lter cover, two kinds of lters, and a lter frame. The new double large lters syst

104MaintenanceCleaning and replacing the air lter (continued)9.Turn the projector on and reset the lter time using the FILTER TIME item in the EASY

105MaintenanceWARNING ►Be careful of handling a battery, as a battery can cause explosion, cracking or leakage, which could result in a re, an injur

106Caring for the mirror and lensIf the projection mirror or lens is awed, soiled or fogged, it could cause deterioration of display quality. Please

107PEN sensorMaintenanceOther careIn order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once ev

108►Before caring, make sure the power cord is not plugged in, and then allow the projector to cool sufciently. The care in a high temperature state

109TroubleshootingTroubleshootingIf an abnormal operation should occur, stop using the projector immediately.Otherwise if a problem occurs with the pr

11Connecting with your devices (continued)(continued on next page)• Before connecting the projector to a computer, consult the computer’s manual and c

110Message DescriptionThe internal temperature is rising. Please turn the power off, and allow the projector to cool down at least 20 minutes. After h

111TroubleshootingRegarding the indicator lampsWhen operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it accord

112TroubleshootingRegarding the indicator lamps (continued)• When the interior portion has become overheated, for safety purposes, the projector is au

113TroubleshootingPhenomena that may be easy to be mistaken for machine defectsAbout the phenomenon confused with a machine defect, check and cope wit

114TroubleshootingPhenomena that may be easy to be mistaken for machine defects (continued)Phenomenon Cases not involving a machine defectReference pa

115Phenomenon Cases not involving a machine defectReference pageVideo screendisplay freezes.The FREEZE function is working.Press FREEZE button to rest

116Phenomenon Cases not involving a machine defectReference pageThe computer connected to the USB TYPE B port of the projector does not start up.The c

117TroubleshootingPhenomena that may be easy to be mistaken for machine defects (continued)Phenomenon Cases not involving a machine defectReference pa

118Phenomenon Cases not involving a machine defectReference pageThe pen does not operate.This may be due to poor contact of the battery.Remove the bat

119Phenomenon Cases not involving a machine defectReference pagePen action is unstable or pen stops operating.Is the power supply for the projector us

12COMPUTER IN1COMPUTER IN2HDMIUSB TYPE BS-VIDEOVIDEOAUDIO OUTAUDIO IN3AUDIO IN1AUDIO IN2MICMONITOR OUTCONTROL USBTYPE A DC5V 0.5A LANRL

120Phenomenon Cases not involving a machine defectReference pageCalibration of the pen position cannot be performed correctly.Is the projector correct

121Phenomenon Cases not involving a machine defectReference pageThe interactive pen stops working.The interactive pen may stop working when plugging i

122SpecicationsSpecicationsEnd User License Agreement for the Projector Software• Software in the projector consists of the plural number of indepen

13COMPUTER IN1COMPUTER IN2HDMIUSB TYPE BS-VIDEOVIDEOAUDIO OUTAUDIO IN3AUDIO IN1AUDIO IN2MICMONITOR OUTCONTROL USBTYPE A DC5V 0.5A LANRS

14Setting upConnecting to a power supply1.Put the connector of the power cord into the AC IN (AC inlet) of the projector.2.Firmly plug the power cord’

15Using the security bar and slotA commercial anti-theft chain or wire up to 10 mm in diameter can be attached to the security bar on the projector.Al

16Using the cable coverUtilize the cable cover as the guard and blind for the connecting parts.1. Connect the signal cables and the power cord to the

17Remote controlRemote controlAbout the remote control signalThe remote control works with the projector’s remote sensor. This projector has a remote

18USB TYPE BRemote controlChanging the frequency of remote control signalThe accessory remote control has the two choices on signal frequency Mode 1:N

19Exchanging the tip of the penWhen the tip of the pen is shortened due to wearing, exchange it according to the following procedure. 1. Remove the ti

2ContentsIntroduction . . . . . . . . . . . . . . . 3Features . . . . . . . . . . . . . . . . . . . . . . 3Checking the contents of package ...3Part

20Power on/off1.Make sure that the power cord is rmly and correctly connected to the projector and the outlet.Turning on the power2.Make sure that th

21Power on/off►Be careful not to pinch your nger with the lens door, to prevent an injury.►Do not touch around the lamp cover and the exhaust vents d

22OperatingOperating1.Adjusting the volumeUse the VOLUME +/VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adj

23Operating1.Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as

241.Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. Selecting a

25OperatingAdjusting the zoom and focusAdjusting the projector's elevatorThe projector has Front foot for inclinations and Rear foot for horizont

26Operating1.Press AUTO button on the remote control. Pressing this button performs the following.Using the automatic adjustment feature For a comp

271.Press the POSITION button on the remote control while no menu is on screen, to display the D-SHIFT (45) dialog on screen.Adjusting the position2.

28Operating1.Using the magnify feature2.3.4.Press the MAGNIFY ON button on the remote control. The picture will be magnied, and the MAGNIFY dialog w

29Operating1.Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLAN

3Introduction• Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector. Us

30Operating1.To start the MENU, press the MENU button. The MENU you last used (EASY or ADVANCED) will appear. EASY MENU has priority to appear just af

31OperatingUsing the menu function (continued)3.To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER b

32EASY MENUEASY MENUFrom the EASY MENU, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons. Then perform it a

33EASY MENUItem DescriptionPICTURE MODEUsing the ◄/► buttons switches the picture mode.The picture modes are combinations of GAMMA and COLOR TEMP sett

34INTERACTIVE menuINTERACTIVE menuItem DescriptionINTERACTIVEExecuting this item starts (or cancels) calibration of the position of the pen.For more d

35PICTURE menuPICTURE menuFrom the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and pre

36PICTURE menuItem DescriptionCOLOR TEMPUsing the ▲/▼ buttons switches the color temperature mode.To adjust CUSTOMSelecting a mode whose name includes

37PICTURE menuItem DescriptionSHARPNESSUsing the ◄/► buttons adjusts the sharpness.Weak ó Strong• There may be some noise and/or the screen may icker

38IMAGE menuIMAGE menuFrom the IMAGE menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the

39IMAGE menuItem DescriptionV POSITIONUsing the ◄/► buttons adjusts the vertical position.Down ó Up• Over-adjusting the vertical position may cause no

4Introduction(1) Lamp cover (101) The lamp unit is inside.(2) Control panel (5)(3) Elevator feet (x 2) (25)(4) Remote sensor (17)(5) Lens (106)(

40IMAGE menuItem DescriptionH PHASEUsing the ◄/► buttons adjusts the horizontal phase to eliminate icker.Right ó Left• This item can be selected only

41INPUT menuINPUT menuFrom the INPUT menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the

42INPUT menu(continued on next page)Item DescriptionVIDEO FORMATThe video format for S-VIDEO port and VIDEO port can be set.(1) Use the ▲/▼ buttons t

43INPUT menuItem DescriptionCOMPUTER INThe computer input signal type for COMPUTER IN1 and IN2 ports can be set.(1) Use the ▲/▼ buttons to select the

44INPUT menuItem DescriptionRESOLUTIONThe resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector.(1) In the INPU

45SETUP menuSETUP menuFrom the SETUP menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press the

46SETUP menuItem Description KEYSTONEUsing the ◄/► buttons corrects the horizontal keystone distortion.Shrink the right of the image ó Shrink the left

47SETUP menuItem DescriptionECO MODEUsing the ▲/▼ buttons changes the eco mode setting.NORMAL ó ECO• When the ECO is selected, acoustic noise and scre

48AUDIO menuAUDIO menuFrom the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the

49AUDIO menuItem DescriptionHDMI AUDIOUsing the ▲/▼ buttons switches the mode for the HDMITM audio.Check each of the two modes provided and select the

5IntroductionControl panel(1) STANDBY/ON button (20)(2) INPUT button (22)(3) POWER indicator (20, 111, 112)(4) TEMP indicator (111, 112)(5) LAMP i

50SCREEN menuSCREEN menuFrom the SCREEN menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press t

51SCREEN menuItem DescriptionMyScreenThis item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and ST

52SCREEN menuItem DescriptionMyScreen LockUsing the ▲/▼ buttons turns on/off the MyScreen lock function.ON ó OFFWhen the ON is selected, the item MySc

53SCREEN menuItem DescriptionSOURCE NAMEEach input port for this projector can have a name applied to it.(1) Use the ▲/▼ buttons on the SCREEN menu t

54SCREEN menuItem DescriptionSOURCE NAME(Continued)(6) The current name will be displayed on the rst line. Use the ▲/▼/◄/► buttons and the ENTER or

55SCREEN menuItem DescriptionC.C.(Closed Caption)The C.C. is the function that displays a transcript or dialog of the audio portion of a video, les o

56OPTION menuOPTION menuFrom the OPTION menu, items shown in the table below can be performed.Select an item using the ▲/▼ cursor buttons, and press t

57OPTION menuItem DescriptionAUTO POWER OFFUsing the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off.Long (max. 99

58OPTION menuItem DescriptionLAMP TIMEThe lamp time is the usage time of the lamp, counted after the last resetting. It is shown in the OPTION menu.Pr

59OPTION menuItem DescriptionMY BUTTONThis item is to assign one of the following functions to MY BUTTON 1/2 on the remote control (6).(1) Use the ▲

6IntroductionRemote control(1) VIDEO button (23)(2) COMPUTER button (23)(3) SEARCH button (24)(4) STANDBY/ON button (20)(5) ASPECT button (24)(6)

60OPTION menuItem DescriptionMY BUTTON(Continued)• ACTIVE IRIS: Changes the active iris mode.• PICTURE MODE: Changes the PICTURE MODE (33).• FILTER

61OPTION menuItem DescriptionSERVICESelecting this item displays the SERVICE menu.Select an item using the ▲/▼ buttons, and press the ► button or the

62OPTION menuItem DescriptionSERVICE(continued)KEY LOCK(1) Use the ▲/▼ buttons to select CONTROL PANEL or REMOTE CONTROL.(2) Use the ◄/► buttons to t

63OPTION menuItem DescriptionSERVICE(continued)REMOTE FREQ.(1) Use the ▲/▼ button to change the projector's remote sensor frequency setting (4,

64OPTION menuItem DescriptionSERVICE(continued)COMMUNICATION(continued)COMMUNICATION TYPESelect the communication type for transmission via the CONTRO

65OPTION menuItem DescriptionSERVICE(continued)COMMUNICATION(continued)RESPONSE LIMIT TIMESelect the time period to wait for receiving response data f

66OPTION menuItem DescriptionSERVICE(continued)INFORMATIONSelecting this item displays a dialog titled “INPUT_INFORMATION”. It shows the information a

67NETWORK menuRemember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network admini

68NETWORK menuItem DescriptionSETUP(continued)IP ADDRESSUse the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is s

69NETWORK menuItem DescriptionPROJECTOR NAME(1) Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJ

7ArrangementRefer to table T-1 and gures F-1 and F-2 at the end of User's Manual (concise) to determine the screen size and projection distance.

70NETWORK menuItem DescriptionMY IMAGESelecting this item displays the MY IMAGE menu. To store images in the projector, the application software PJImg

71NETWORK menuItem DescriptionPRESENTATIONSelecting this item displays the PRESENTATION menu.Use ▲/▼ buttons to select one of the following items, the

72NETWORK menuItem DescriptionPRESENTATION(continued)MULTI PC MODE(continued)• To change from Multi PC mode to Single PC mode, select one of computers

73NETWORK menuItem DescriptionINFORMATIONSelecting this item displays the NETWORK_INFORMATION dialog for conrming the network settings.• For the deta

74SECURITY menuThis projector is equipped with security functions.From the SECURITY menu, items shown in the table below can be performed.To use SECUR

75SECURITY menuItem DescriptionMyScreen PASSWORDThe MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the

76SECURITY menuItem DescriptionPIN LOCKPIN LOCK is a function which prevents the projector from being used unless a registered Code is input.1 Turning

77SECURITY menuItem DescriptionTRANSITION DETECTORIf this function is set to ON when the vertical angle of the projector or MIRROR setting at which th

78SECURITY menuItem DescriptionMY TEXT PASSWORDThe MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. When the password is set

79SECURITY menuItem DescriptionMY TEXT DISPLAY(1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY and press the ► or ENTER but

8Setting up►Place the projector in a cool place, and ensure that there is sufcient ventilation. The high temperature of the projector could cause re

80Presentation toolsPresentation toolsThe projector has the following three convenient tools that enable on-screen presentations easily and quickly:-

81Presentation toolsNOTEInteractive Function (continued)• Do not place the projector near equipment that may emit electromagnetic waves or radio waves

82Presentation toolsNOTE• Install and use at a position where the screen size is between 60"-100" when digital zoom is at the maximum (100%)

83Presentation toolsCOMPUTER IN1COMPUTER IN2HDMIUSB TYPE BS-VIDEOVIDEOAUDIO OUTAUDIO IN3AUDIO IN1AUDIO IN2MICMONITOR OUTCONTROL USBTYPE A DC5V

84Presentation toolsInteractive Function (continued)Preliminary preparationUsing the penTo use the Interactive Function, a special pen is needed (6).

85Presentation toolsSIDE BUTTON No1SIDE BUTTON No.0Pen tipInteractive Function (continued)Basic pen operationCustomizing the penIn the default setting

86Presentation toolsInteractive Function (continued)Using “StarBoard Software”If you are using the “StarBoard Software” for the rst time, install it

87Presentation toolsThe PC-LESS Presentation reads image data from storage media inserted into the USB TYPE A port and displays the image on the follo

88Presentation toolsThumbnail modePC-LESS Presentation (continued)The Thumbnail mode displays the images stored in a USB storage device on the Thumbna

89Presentation toolsPC-LESS Presentation (continued)The SETUP menu for the selected imageItem FunctionsSETUPUse the ◄/► cursor buttons to switch each

9Setting upBefore connecting the projector to a device, consult the manual of the device to conrm that the device is suitable for connecting with thi

90Presentation toolsYou can also control the images by using the menu on the Thumbnail screen.PC-LESS Presentation (continued)Operating by the menu on

91Presentation toolsPC-LESS Presentation (continued)• These operations are not accessible while the projector OSD is displayed.• The Thumbnail mode sh

92Presentation toolsPC-LESS Presentation (continued)The Full Screen mode shows a full display image. To display in Full Screen mode, select an image i

93Presentation toolsPC-LESS Presentation (continued)Slideshow modeThe following operations can be accessible while the Slideshow is displayed.* These

94Presentation toolsPC-LESS Presentation (continued)You can play the Slideshow at your desired conguration. Congure the Slideshow items in the Thumb

95Presentation toolsPC-LESS Presentation (continued)PlaylistThe Playlist is a DOS format text le, which decides the order of displayed still image l

96Presentation toolsUSB DisplayThe projector can display images transferred from a computer via an USB cable (10).Performance may suffer if the image

97Presentation toolsThis application will appear in the Windows notication area once it starts. You can quit the application from your computer by se

98Presentation toolsDisplay : The Floating menu is displayed, and the icon disappears from the Windows notication area.Quit : The application is c

99Presentation toolsIf you select the Option button on the Floating menu, the Options window is displayed.Optimize PerformanceThe “LiveViewer Lite for