Hitachi CP-X268A Bedienungsanleitung PDF herunterladen (Seite 10)

Adjusting the projector's elevator

CAUTION ►If you press the elevator button without holding the projector,

the projector might crash down, overturn, smash your ngers and possibly

result in malfunction. To prevent damaging the projector and injuring yourself,

always hold the projector whenever using the elevator buttons to adjust the

elevator feet.

►Do not incline the projector rightward or leftward. Also do not incline it

backward or forward exceeding 30 degrees. Exceeding these range could

cause malfunction, and could shorten the lifetime of the consumables.

►Except for inclining by the elevator feet adjustment, place the projector

horizontally.

You can use the elevator feet to make adjustments if the surface on which you

need to set the projector is uneven or if you otherwise need to adjust the angle of

projection. The adjustment range of the elevator feet is 0 to 9 degrees.

After making sure that the projector is cool adequately, press and hold in the

elevator buttons while holding the projector.

The elevator buttons and the elevator feet are on the both sides.

Raise or lower the projector to the desired height and release the elevator

buttons.

When you release the elevator buttons, the elevator feet will lock into position.

If necessary, you can also nely adjust the height of the projector by twisting

the elevator feet by hand.

Setting up

Elevator feet

Elevator button

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 69 70

Keine Kommentare

Hitachi CP-X268A Bedienungsanleitung Seite 10