Hitachi CP-X268A Bedienungsanleitung PDF herunterladen (Seite 16)

When using the projector with a wireless LAN please insert the included Wireless

Network Card.

When using a commercial SD Memory card in order to view images insert the SD

Memory card in the same manner.

And when using a commercial USB MEMORY in order to view images insert the

USB MEMORY to the AUX I/O port.

(



13)

See User's Manual - Network Function for information on using either type of card.

Make sure the projector’s power switch is OFF.

Remove the SD card slot cover.

 Lift the cover slightly by the small

indentation in the middle of the front of the

cover using a nger nail or other means.

 Pull the cover forward and remove it

completely from the projector.

Setting up

Inserting an SD Card and USB Memory

Angled corner

SD Card Slot

Insert the SD card.

Slowly insert the SD card completely into

the SD card slot.

Make sure the angled corner of the SD card is

facing the right side (AUX I/O port side) of the

projector while inserting.

Replace the SD card slot cover.

Replace the cover by reversing the procedure used when removing the cover.

Indentation

AUX I/O Port

IMPORTANT NOTE • To comply with FCC RF exposure compliance

requirements, the antenna used for this transmitter must be installed to provide

a separation distance of at least 20cm from all persons and must not be co-

located or operating in conjunction with any other antenna or transmitter.

NOTE • When using the projector with a wired LAN, please remove the

Wireless Network card.

• Select the "REMOVE MEDIA" on MIU menu before SD card or USB memory

is removed.

NOTE • The LED becomes downward in some USB Memory. Remove the

USB Memory after the accessing is completely nished.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 69 70

Keine Kommentare

Hitachi CP-X268A Bedienungsanleitung Seite 16