Hitachi Car Video System lcd monitor Bedienungsanleitung

ENGLISHUSER’S MANUALThank you very much for purchasing the HITACHI LCD Monitor.Before using your monitor, please carefully read the "SAFETY INSTR

8COMPONENT NAMESCabinet(front frame)PanelFrontControl panel• ( ) indicates the function while the MENU is displayed on the screen.SUB-POWER button 19V

9ENGLISH1. Open the battery cover.• Slide back and remove the battery cover in the direction of the arrow.2. Load batteries.• Load two Size AA batteri

10COMPONENT NAMES (continued)Remote control (continued)INPUT SELECTPress this button to change input mode.SOUND MODEYou may recall the sound mode by p

11ENGLISH[Buttons for TELETEXT Mode]TELETEXT FUNCTIONCOMPONENT NAMES (continued)Remote control (continued)COLOR buttons(RED, GREEN, YELLOW, BLUE)PAGE

12Securing to a wall or pillarUsing a commercially available cord, chain and clamp, secure the set to a firm wall or pillar.Securing desktop(1) Using

13ENGLISH(1) Make sure that the power switch of the monitor is turned off.(2) Make sure that the power switch of the audio visual device is turned off

14If there are noise appearance in the picture of VHF-Low band channel, please use the double-shielded cable (not provided) for RF LEADS to reduce the

15ENGLISH(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this device.• See "PR

161. Attach the speaker connecting cables to the monitor. (Make sure the ferrite core is toward the monitor side)2. Attach the speaker cables to speak

17ENGLISH1. Mount the side input into the speaker holder.Hook the clamps (4 pieces) of the speaker holder into the holes as shown in the figure and pu

18Connect the power cord, after completing all other connections.(1) Connect the power cord to this device.(2) Connect the power cord plug to the powe

19ENGLISH• To turn the monitor power ON, press the main power switch on the monitor main unit to ON, and then press the SUB POWER button of control pa

20• Input can be switched by pressing the AV1~6, RGB1 or RGB2 buttons of the remote control.• Input can be switched to TV by pressing CHANNEL UP/DOWN

21ENGLISHVertical picture position can be adjusted for [Panoramic], [Zoom] and [Cinema] mode as follows.1. Press ZOOM button and  SELECT buttons dur

22The volume can be adjusted by pressing the and buttons of the remote control (or the and volume buttons of the monitor unit).• When a button

23ENGLISH• This feature controls the motorized stand. It allows turning the LCD monitor left or right using the remote control.1. Press Swivel button.

24The input signal status can be displayed on the screen by pressing the RECALL button of the remote control.• The display will go out in approximatel

25ENGLISHWhen the MULTI PICTURE button on the remote control is pressed, the screen will display the multi pictures. And then three types of the scree

26Pressing the MULTI PICTURE button one time will display 2 pictures.• The speaker icon can be shifted left and right by pressing the  and  SELECT b

27ENGLISHWhen the FREEZE button on the remote control is pressed, the screen transfers into the freeze mode.• There are two types of freezing screen m

1ENGLISHImportantPlease read this User's Manual thoroughly, especially the Safety Instructions on Page 3 to 6. Mis-use may cause damage to your L

28When the MENU button is pressed, the adjustment menu screen will be displayed; from there, several adjustments and settings are possible by using th

29ENGLISHOPERATING INSTRUCTIONS (continued)SETUP MENU (TV mode) Picture Audio Timer Function Setup Language Select OK SetSetup Auto Tuni

30Selected characters WX Setup hintAuto TuningModeSelect the channel entry method between position setting or direct setting. And press the OK button

31ENGLISHOPERATING INSTRUCTIONS (continued)SETUP MENU (Video mode)    Selected characters  Setup hintSyst

32OPERATING INSTRUCTIONS (continued)SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB))     Selected characters  Setup h

33ENGLISH* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.Sel

34Selected characters  Setup hintScreen SaverThis moves the picture around the screen in small amounts, at set intervals, to reduce the residual ima

35ENGLISHOPERATING INSTRUCTIONS (continued)PICTURE MENU (TV/Video mode)     

36Selected characters  Setup hintPicture ModeDynamic: This setting is best for very bright ambient lighting.Natural: This setting is for normal ligh

37ENGLISHSelected characters  Setup hintColor ManagementTurn On when the original balance of each color is required to adjust depending on the user’

2FEATURES ... 1SAFETY INSTRUCTIONS ... 3NOTES ...

38Selected characters  Setup hintContrastNarrows the gap between brightness and darkness.Broadens the gap between brightness and darkness.Adjust for

39ENGLISHOPERATING INSTRUCTIONS (continued)Selected characters  Setup hintAudio ModeMovie: This selects the audio suitable for Movie.Music: This sel

40Select a language by  and  SELECT buttons and press the OK button.Selected characters  Setup hintOff TimerThis function automatically sets the p

41ENGLISHApproximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.• The previously recorded it

42A2 / NICAM / Sound Multiplex (TV mode)• The CH I / II button is only useful for NICAM and sound multiplex signals.Otherwise pressing this button wi

43ENGLISHWhen the RGB1, RGB2 input is selected• When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set to be activa

44Set up hintExample) HITACHI DVD To operate HITACHI DVD player, press and hold the button, followed by the button.1. Set up the makerPress butto

45ENGLISHMake the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer.Customer servicin

46Symptom Point to check See page• There are locations on the screen that are different from the periphery (*).* Points that do not light, points with

47ENGLISHDepending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments suggested below. (on

3ENGLISHThis LCD monitor has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be ta

48Product specifications and designs are subject to change without notice.• The monitor takes at least 30 minutes to attain the status of optimal pict

49ENGLISHRGB terminal (D-sub 15-pin connector)S-input connector pin specificationsHDMI connector pin specificationsDVI terminal (DVI-D)PRODUCT SPECIFI

50Applicable video signals for input terminal (TV mode)(O:Available)With composite input(AV1~AV5 input) and S-video input (AV3, AV5 input).With compon

51ENGLISHWith Digital signal input.(O:Acceptable)PRODUCT SPECIFICATIONS (continued)Recommended Signal List (continued)No.Signal modeHorizontal frequen

52With Analog signal input (RGB2 input)PRODUCT SPECIFICATIONS (continued)Recommended Signal List (continued)No.Signal modeHorizontal frequency (kHz)Do

4Be cautious of the power cord connection.Incorrect connection of the power cord could result in fire or electrical shock.• Do not touch the power cor

5ENGLISHBe careful in moving the monitor.Neglect could result in an injury or damage.• Do not move the monitor during use. Before moving, disconnect t

6Prevention of an obstacle to Radio receiversThis monitor has been designed pursuant to the international EMI standards. This is to prevent a problem

7ENGLISHAbout screen defects• High precision technology is used in the making of LCD panels but there may be dark spots (points that do not illuminate