Hitachi CP-SX8350 Bedienungsanleitung PDF herunterladen (Seite 17)

This projector is equipped with NETWORK BRIDGE function.

When the projector connects to the computer by wired or wireles LAN

communicaton, an external device that is connected with this projector by RS-

232C communication can be controlled from the computer as a network terminal.

For details, see the 6. Network Bridge function in the Network Guide.

Network Bridge Communication

LAN

LAN cable

(CAT-5 or greater)

RS-232C

RS-232C cable

(cross)

USB wireless adapter

NOTE • If data is transferred via wireless and wired LAN at the same time,

the projector may not be able to process the data correctly.

Connection

If you use wired LAN, connect the computer's LAN port and the projector's

LAN port with a LAN cable. Use the cable that fullls the specication shown

in gure. If you use wireless LAN, insert the USB wireless adapter into the

projector's LAN port.

Connect the projector's CONTROL port and the RS-232C port of the devices

that you want to control with a RS-232C cable.

Turn the computer on, and after the computer has started up turn the

projector on.

Set the COMMUNICATION TYPE to NETWORK BRIDGE in the

COMMUNICATION menu of the OPTION - SERVICE menu.

Network Bridge Communication

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Keine Kommentare

Hitachi CP-SX8350 Bedienungsanleitung Seite 17