Hitachi CP-X268A Bedienungsanleitung PDF herunterladen (Seite 43)

Item Description

AUTO OFF

Using the buttons ▲/▼ adjusts the time to count down to

automatically turn the projector off.

Long (max. 99 minutes)

Short (min. 0 minute = DISABLE)

AUTO OFF

ENABLE

AUTO OFF

DISABLE

When the time is set to 0, the projector is not turned off automatically.

When the time is set to 1 to 99, and when the passed time with no-

signal or an unsuitable signal reaches at the set time, the projector

lamp will be turned off.

If one of the projector's buttons or the remote control buttons is pressed

or one of the commands (except get commands) is transmitted to the

control port during the corresponding time, projector will not be turned off.

Please refer to the section “Turning off the power”

(



19).

LAMP TIME

The lamp time is the time counted after the last resetting. It is

shown in the OPTION menu as the usage time of the lamp.

Pressing the RESET button on the remote control or the button ►

of the projector displays a dialog. To reset the lamp time, select the

RESET using the button ▲.

RESET



CANCEL

• Please reset the lamp time only when you have replaced the lamp,

for a suitable indication about the lamp.

• For the lamp replacement, see the section "Lamp" (



57, 58).

FILTER TIME

The lter time is the time counted after the last resetting. It is shown

in the OPTION menu as the usage time of the air lter.

Pressing the RESET button on the remote control or the button ► of the

projector displays a dialog. To reset the lter time, select the RESET using

the button ▲.

RESET



CANCEL

•

Please reset the lter time only when you have cleaned or replaced

the air lter, for a suitable indication about the air lter.

• For the air lter cleaning, see the section "Air lter" (



59, 60).

MY BUTTON

Sets the assigned function for the MY BUTTON1 and 2 buttons on

the included remote control.

• RGB1: Sets port to RGB1.

• RGB2: Sets port to RGB2.

• MIU: Sets port to MIU.

• COMPONENT: Sets port to COMPONENT.

• S-VIDEO: Sets port to S-VIDEO.

• VIDEO: Sets port to VIDEO.

• e-SHOT: Displays the e-SHOT menu (



53).

• INFORMATION: Displays INPUT INFORMATION (



45).

• AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE

correction (



37).

• MY MEMORY: Loads MY MEMORY settings (



31).

• PICTURE MODE: Changes the PICTURE mode (



27).

•

FILTER RESET: Displays the lter time reset conrmation dialogue

(



43).

• VOLUME+: Sets the volume up.

• VOLUME

: Sets the volume down.

OPTION Menu

OPTION Menu (continued)

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Hitachi CP-X268A Bedienungsanleitung Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Hitachi CP-X268A